[rescue] PIX-ish ATX cases?

[Ido Dubrawsky]

On Fri, Feb 06, 2004 at 07:57:49AM -0600, rescue-request at sunhelp.org wrote:
> From: Robert Rose <rescue at mylighthouse.net>
> Subject: Re: [rescue] PIX-ish ATX cases?
> To: rescue at sunhelp.org
> Message-ID: <2E9DB978-587B-11D8-95C6-000A95EFAF62 at mylighthouse.net>
> Content-Type: text/plain; charset=US-ASCII; format=flowed
> 
> On 06/02/2004, at 3:34 PM, MrBill wrote:
> > Unfortunately, traditional "rackmount" cases are way too deep; I don't
> > need room for anything but the motherboard, power supply, PCI NICs and
> > the slot-1 CPU, and a floppy drive.
> >
> > Suggestions?  I've got a friend looking for me a case from a dead PIX, 
> > but
> > that may take a while..
> 
> Keep an eye out for a Cisco LocalDirector too, they appear to be (I've 
> never had the opportunity of pulling one apart) the same case as the 
> PIX 520, but since Cisco acquired Arrowpoint and people started 
> ditching their LocalDirectors ('cos the Arrowpoints actually work) you 
> might find one cheap.
> 
> I'd also be interested to know if the LocalDirector and PIX are similar 
> enough that the LocalDirector could be re-flashed as a PIX.
> 
> Rob
> 
They cases are identical.  I've done it before where I've put a PIX motherboard
into the LocalDirector case.  

Ido
-- 
===============================================================================
Ido Dubrawsky, CISSP           		E-mail:          ido at dubrawsky.org
Network Security Architect
dubrawsky.org
500 Hermleigh Rd
Silver Spring, MD. 20902
(301) 651-5441 (cell)
===============================================================================