[rescue] Problem with scsi disks
Yunus Mansuri
Yunus.Mansuri at poports.com
Wed Sep 17 03:19:33 CDT 2003
Hi !
I have problem with my scsi drives I have 2 x 36.4 GB scsi drive (Vendor
Fijuitsu) which I put recently (previously it had old scsi disk and is
changed to new one)
Now The server crashed and when I booted the machine I get following error
in the message files.
Sep 16 10:11:54 edidrm scsi: [ID 193665 kern.info] sd1 at glm0: target 1 lun
0
Sep 16 10:11:54 edidrm genunix: [ID 936769 kern.info] sd1 is
/pci at 1f,0/pci at 1/scs
i at 1/sd at 1,0
Sep 16 10:11:54 edidrm scsi: [ID 107833 kern.warning] WARNING:
/pci at 1f,0/pci at 1/s
csi at 1 (glm0):
Sep 16 10:11:54 edidrm SCSI bus DATA IN phase parity error
Sep 16 10:11:54 edidrm glm: [ID 663555 kern.warning] WARNING:
ID[SUNWpd.glm.pari
ty_check.6010]
Sep 16 10:11:54 edidrm scsi: [ID 107833 kern.warning] WARNING:
/pci at 1f,0/pci at 1/s
csi at 1 (glm0):
Sep 16 10:11:54 edidrm Target 1 reducing sync. transfer rate
Sep 16 10:11:54 edidrm glm: [ID 923092 kern.warning] WARNING:
ID[SUNWpd.glm.sync
_wide_backoff.6014]
Sep 16 10:11:55 edidrm scsi: [ID 365881 kern.info] <SUN36G cyl 24620
alt 2
hd 27 sec 107>
Sep 16 10:11:55 edidrm scsi: [ID 193665 kern.info] sd2 at glm0: target 2 lun
0
Sep 16 10:11:55 edidrm genunix: [ID 936769 kern.info] sd2 is
/pci at 1f,0/pci at 1/scs
i at 1/sd at 2,0
Sep 16 10:11:55 edidrm scsi: [ID 107833 kern.warning] WARNING:
/pci at 1f,0/pci at 1/s
csi at 1 (glm0):
Sep 16 10:11:55 edidrm SCSI bus DATA IN phase parity error
Sep 16 10:11:55 edidrm glm: [ID 663555 kern.warning] WARNING:
ID[SUNWpd.glm.pari
ty_check.6010]
Sep 16 10:11:55 edidrm scsi: [ID 107833 kern.warning] WARNING:
/pci at 1f,0/pci at 1/s
csi at 1 (glm0):
Sep 16 10:11:55 edidrm Target 2 reducing sync. transfer rate
Sep 16 10:11:55 edidrm glm: [ID 923092 kern.warning] WARNING:
ID[SUNWpd.glm.sync
_wide_backoff.6014]
Sep 16 10:11:55 edidrm scsi: [ID 365881 kern.info] <SUN36G cyl 24620
alt 2
also after the boot I see a very high CPU wait (Max reached 63%wait ) when I
do a copy
Any comments suggestion in resolving this issue would be highly appreciated
..
Thanks for help in advance
--yunus .
*************************************************************************************************
"This e-mail and its attachments are intended for the named addressee only and no liability is accepted for use or reliance on any part of this e-mail by any other person. It is confidential, may be subject to privilege and is also subject to copyright. No part of it should be reproduced, adapted or communicated without the written consent of the copyright owner. Any confidentiality or privilege is not waived or lost because this e-mail has been received by you and you are not the intended recipient. If you are not the intended recipient, please let us know by reply e-mail.
Please note that e-mails can be interfered with, can contain computer viruses or other defects and may not be successfully replicated on other systems. This footnote confirms that this e-mail message has been swept for the presence of computer viruses. However whilst the sender has taken reasonable precautions to minimise the risk of this email and any attachment containing viruses, we cannot accept liability for any such viruses and we give no warranties in relation to any of the above matters. If you have any doubts about the authenticity of this e-mail please contact the sender immediately. No responsibility is accepted for any changes made to a document other than those made by the sender."
More information about the rescue
mailing list