[rescue] Octane woes

[Bjorn Ramqvist]

"Jonathan C. Patschke" wrote:
> 
> On Thu, 6 Mar 2003, Curtis H. Wilbar Jr. wrote:
> 
> > I have a 030-0887-005 mainboard... any idea what the max processor is
> > with that rev board ?  R12K ? dual R10K ???
> 
> You're okay, then.
> 
> I believe that board will take all R10k modules (single and dual), but
> only select R12k modules.  I -think- it's the 300MHz R12k that doesn't
> work on the 030-0887-xxx boards, but the rest do.  R14k is right out, of
> course.

It does:

pamela 1# hinv -m 
      PM10300MHZ Board: barcode JKN385     part 030-1355-001 rev  M 
            IP30 Board: barcode FSM417     part 030-0887-003 rev  G 
             FP1 Board: barcode EBK240     part 030-0891-003 rev  B 
    PWR.SPPLY.SR Board: barcode AAB7300044 part 060-0028-002 rev  B 
            GM10 Board: barcode EBL652     part 030-0938-003 rev  S 
1 300 MHZ IP30 Processor 
CPU: MIPS R12000 Processor Chip Revision: 2.3 
FPU: MIPS R12010 Floating Point Chip Revision: 0.0 
Main memory size: 1024 Mbytes 
Xbow ASIC: Revision 1.2 
Instruction cache size: 32 Kbytes 
Data cache size: 32 Kbytes 
Secondary unified instruction/data cache size: 2 Mbytes 
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended 
  Disk drive: unit 1 on SCSI controller 0 
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended 
IOC3 serial port: tty1 
IOC3 serial port: tty2 
IOC3 parallel port: plp1 
Graphics board: SI 
Integral Fast Ethernet: ef0, version 1, pci 2 
Iris Audio Processor: version RAD revision 12.0, number 1 
pamela 2#

/Bjorn