[rescue] Sun CP1500

[Paul Hortiatis]

I recently got a Sun CP1500-360 with a pair of the ZNYX quad ethernet
controler, I want to set the machine up as a router using netbsd... when i
boot netbsd either the bootable cd or after i installed the os with the
extra network cards the system hangs.
The console output below is where it hangs...

The network cards work fine under solaris, and it doesn't matter if there is
one or two cards in the machine... both have the same result...

>From what i have read about the tulip driver and quad ethernet controlers,
there is a problem with irq assignment, i'm not familari enough with the sun
hard ware to change any thing...


pci2: i/o space, memory space enabled
ppb2 at pci2 dev 1 function 0: Digital Equipment DECchip 21150 PCI-PCI
Bridge ()
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ppb3 at pci3 dev 14 function 0: Digital Equipment DECchip 21152 PCI-PCI
Bridge )
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
tlp0 at pci4 dev 4 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at ivec 0
tlp0: Ethernet address 00:c0:95:e0:8c:0c
tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp1 at pci4 dev 5 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at ivec 0
tlp1: Ethernet address 00:c0:95:e0:8c:0d
tlp1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp2 at pci4 dev 6 function 0: DECchip 21143 Ethernet, pass 4.1

Thnx
	Paul