[rescue] Old Clariion SCSI-2 Drive Modules

[George Adkins]

On Thursday 16 May 2002 12:03 am, you wrote:
> If anyone has any Clariion/DataGeneral/HP Arrays around, I'm making a list
> for myself
>
> 1) What drives were used in which modules
> 2) Which *jumper pin wire block* is used with which drive
>
> a little personal project
>
> (cant use module unless harness matches drive :-(

I did,  The modules I had used 500MB narrow IBM drives, and I put in a full 
compliment of 2 Gig 'Cudas.

I just looked at the specs for the drives, figured out which wires were going 
to the various pins, (ID0 ID1 ID2, etc...) and re-arranged them in the jumper 
block to match the pins for the drives I was "transplanting".  It took a 
couple of hours to do all 20 of them, but it was worth it...

George

P.S.  I probably have the pinouts for the header on the daughterboard inside 
the module here somewhere, as well as the pin assignments for the IBM 0664's 
that were in the trays when I got them.

George