[rescue] Re: SBE/S Apple AAUI v SBE Connector

[Leslie Connally]

yes, pinouts _do_ sure look different..


http://sunsolve.sun.com/handbook_pub/General/Comm_Tr.html
SBE/S 10BASE-T and 10BASE-5

14-Pin Champ
PIN     SIGNAL  PIN     SIGNAL
 1      COL+    8       COL-
 2      TD+     9       TD-
 3      RD+     10      RD-
 4      GND     11      +12Vdc
 5      GND     12      +12Vdc
 6      TPO+    13      TPO-
 7      TPI+    14      TPI-


http://www.google.com/search?hl=en&q=apple+aaui+pinout

Ethernet: AAUI Connector Pinouts
The Apple Attachment Unit Interface (AAUI) connector is a
14-position, 0.050-inch-spaced ribbon contact connector.
AAUI signals have the same description, function, and
electrical requirements as the AUI signals of the same name,
as detailed in the IEEE Standard 802.3-1990 CSMA/CD,
section 7.
Pin     Signal Name     Signal Description
1       FN Pwr          Power (+12V @ 2.1W or +5V @ 1.9W)
2       DI-A            Data in circuit A
3       DI-B            Data in circuit B
4       VCC             Voltage Common
5       CI-A            Control in circuit A
6       CI-B            Control in circuit B
7       +5V             +5 volts (from host)
8       +5V             Secondary +5 volts (from host)
9       DO-A            Data Out circuit A
10      DO-B            Data Out circuit B
11      VCC             Secondary Voltage Common
12      NC              Reserved
13      NC              Reserved
14      FN Pwr          Secondary +12V @ 2.1W or +5V @1.9W
Shell   Protective Gnd  Protective Ground