[rescue] SRM Error Codes & Diags

[Leslie Connally]

EB
              Failed to detect CPU speed

a cooked processor??


(make your email window w-i-d-e for better layout)

1.3. Status and Error Codes on AlphaStations

Table 3. Status and Error Codes

 Status Code
              Meaning
 DF
              Power on, SROM program entered, beginning to initialize EV5 CPU
 DE
              Initializing cpu/system interface, Sizing MemorySizing,
configuring third level cache and MMB data path
 DD
              Sizing CPU speed
 DC
              Sizing and initializing the scache
 DB
              Initializing and testing the PCI bus, testing PCI bus data path
 DA
              Sizing the bcache
 D9
              Sizing memory
 D8
              Configuring memory
 D7
              Initializing memory test
 D6
              Testing bcache bits
 D5
              Testing memory bits
 D4
              Testing bcache addresses
 D3
              Testing bcache addresses
 D2
              Testing bcache cells
 D1
              Testing memory cells
 D0
              Initializing all memory
 CF
              Loading flash ROM code
 CE
              Reinitializing cpu/system interface
 CD
              Code execution complete
 Nonfatal
              Error Code Meaning
 EE
              No bcache size bits detected
 EB
              Failed to detect CPU speed
 E9
              Failed to detect real-time clock; system defaults to 300 Mhz,
providing the most relaxed operating parameters
 E4
              Memory datapath error. If there is no more memory to
reconfigure after the offending bank has been mapped out, error code FA
              will be displayed (See FATAL errors).
 E3
              Memory address line error; system maps out the offending bank
and reconfigures without it. If there is no more memory to
              reconfigure after the offending bank has been mapped out,
error code FA will be displayed (See FATAL errors).
 E2
              Bcache cell error
 E1
              Memory cell error
 E0
              ROM checksum error
 Fatal
              Error Code Meaning
 FF
              No scache bits set in sc_ctl register
 FD
              Floppy drive error
 FC
              No MMBs, or MMB mismatch *
 FB
              Reserved
 FA
              NO usable memory detected, or all detected memory fails the
memory tests
 F9
              Sys init failure - read/write miscompare in one of the
control/status registers
 F8
              PCI data path error
 F7
              pceb init failure
 F6
              System finds a bad CIA memory csr
 F5
              Bcache data path error
 F4
              Bcache address line error
 F3
              Bcache cell error
 F2
              Reserved
 F1
              ROM data path read error
 F0
              Reserved