[rescue] PCI slots/Solaris/FC-AL

[Bill Bradford]

Got Solaris 9 on my Blade 1000.. Now I'm trying to figure out if it
even sees (at all) the Interphase PCI FC-AL card I've got.

I've *already* got a Sun Gig-E/FC-AL card in the system, and the system
itself uses FC-AL drives...

Here's what prtdiag says:

     Bus   Freq
Brd  Type  MHz   Slot        Name                          Model
---  ----  ----  ----------  ----------------------------  --------------------
 0   pci    33   +s/system-board  ebus/ns87317-ecpp (parallel)                  
 0   pci    33   +s/system-board  ebus/se (serial)                              
 0   pci    33   +s/system-board  pci108e,1101 (network)        SUNW,pci-eri    
 0   pci    33   +s/system-board  pciclass,0c0010 (firewire)                    
 0   pci    33   +s/system-board  scsi-pci1000,f (scsi-2)                       
 0   pci    33   +s/system-board  scsi-pci1000,f (scsi-2)                       
 0   pci    33   +s/system-board  fibre-channel                                 
 0   pci    33   +s/system-board  pci108e,2bad (network)        SUNW,pci-gem    
 0   pci    33   +s/system-board  SUNW,ifp-pci1077,2100 (fcal)                  
 0   pci    66   +s/system-board  SUNW,qlc-pci1077,2200 (scsi-+                 
 0   upa   120   +em-board/J4501  FFB, Double Buffered (displa+ SUNW,501-4788   
I have no way of telling if its even *seeing* the card.  Suggestions?

Bill


-- 
Bill Bradford     
mrbill at mrbill.net 
Austin, TX