[rescue] CDROM Problem: Can't open boot device

[G W Adkins]

> I connected the CDROM to the SCSI cable, and attempted to set the
> correct SCSI ID on the jumpers.
>
> ID1 ID2 ID4 PRTY   PRV/ALW  Test Term
>
> everytime I try to boot from cdrom, I get:
> Rebooting with command: boot cdrom
> Boot device: /sbus/SUNW, fas at e,880000/sd at 6,0:f   File and args:
>
> probe-scsi shows the SCSI ID(target number) moving when I move the Short
> from ID1 to ID2 to ID4 , so its not an identity issue .
> (hard drive is Target 0, Unit 0)

jumper ID2 _and_ ID4 (scsi ID 6) on the CDRom drive  Suns want to see the
CDRom at ID 6.