[SunRescue] nextstep/pa-risc

[Mattias Nordlund]

Ok, will check the block jumper, I tried ID6 on the CD (as this one usualy
is used to boot sun's) and the disk was on ID0.

/Mattias

On Fri, 1 Jun 2001, Mike Nicewonger wrote:

> Make sure you have the block jumper set on the Plextor. NS wants to see a
> 512 byte block drive. Also change the CD-ROM to ID 6 and the hard disk to 1
> or 2. NS wants to see the CD-ROM at 6.
>
> Mike N
> ----- Original Message -----
> From: "Mattias Nordlund" <mathew at eagle.y.se>
> To: <rescue at sunhelp.org>
> Sent: Friday, June 01, 2001 4:46 PM
> Subject: Re: [SunRescue] nextstep/pa-risc
>
>
> >
> > On Fri, 1 Jun 2001 ward at zilla.nu wrote:
> >
> > > On Fri, Jun 01, 2001 at 10:13:22PM +0200, Mattias Nordlund wrote:
> > > >
> > > > Does anyone have installation instructions for how to install nextstep
> on
> > > > a 712/60?
> > >
> > > Boot from CD, follow instructions.  Pretty much all there is.  Got any
> > > specific questions?
> > >
> >
> > I boot from CD, and then it just sits there =)
> >
> > It fins the network then hangs on:
> > Registering event0:
> >
> > CD (Plextor 40x, works nice with HP-UX) is ID0
> > Disk (ST12400, works with HP-UX) is ID6
> >
> > Mattias
> >
> > _______________________________________________
> > rescue maillist  -  rescue at sunhelp.org
> > http://www.sunhelp.org/mailman/listinfo/rescue
> >
>
> _______________________________________________
> rescue maillist  -  rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>