[rescue] [rescue]Q: setting a TGX+ board to display 1600x1200

[Kevin Loch]

Did you try setting it at the rom monitor?  I don't know if that will
work for that machine/card but you might try:

ok> setenv output-device screen:r1280x1024x76

KL

Francisco Javier Mesa-Martinez wrote:
> 
> Hi! I got a SBUS TGX+ board in my ultra1. The board is connected to a sun
> GDM20E20 monitor, so I was wondering if it is possible to setup the board
> so that it displays a higher resolution? I know the board is supposed to
> be able to run at 1600x1200 and the monitor can display that resolution at
> 60hz.
> 
> Does anyone know how to setup the board to achieve such goal? So far I
> tried to configure it so I can run at 1200x1024, after I looked at suns
> documentation, but it refuses to change resolution. Here is the script I
> am using (I am running solaris 8 btw)
> 
> Any help will be appreciated, thanks!
> 
> #!/bin/sh
> eeprom fcode-debug\?=true
> eeprom nvramrc='probe-all
> :vsetup "135000000,81128,76,32,64,288,1280,2,8,32,1024,COLOR,0OFFSET";
> vsetup 4
> "/sbus/cgsix at 2" "override" execute-device-method drop
> install-console
> banner
> '
> eeprom use-nvramrc\?=true
> 
> _______________________________________________
> rescue maillist  -  rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue