[SunRescue] RDI Britelite WAS (Weitek PowerUp Question )

CyrusM.Reedreedc at cc.wwu.edu CyrusM.Reedreedc at cc.wwu.edu
Wed Oct 11 17:02:57 CDT 2000


Hmm, I thought it was one of those toys with the translucent pegs and a 
lightbulb that you could make pictures with....

heh heh heh

-Cyrus

On Wed, 11 Oct 2000, Mike Nicewonger wrote:

> The Britelite is a, um, 'luggable' IPX workstation. It is a self contained
> portable computer, very much like a laptop but a bit bigger and heavier, it
> has a flip up LCD display otherwise it is a stock IPX, takes low profile
> SIMMs but other than that and the frambuffer it is normal. I'll see if I can
> dredge up some photo's later this week. The one I have needs a little work.
> NVRAM, bigger HD, more RAM. Maybe even that PowerUp. Of course I will put
> either Open BSD or Net BSD on the box.
> 
> Mike N
> ----- Original Message -----
> From: "Mike Hebel" <druaga at pmail.net>
> To: <rescue at sunhelp.org>
> Sent: Wednesday, October 11, 2000 4:04 PM
> Subject: RE: [SunRescue] RDI Britelite WAS (Weitek PowerUp Question )
> 
> 
> > I've vaguely heard of RDI but what is the Britelite?  How's it different
> > than a standard IPX?  Anybody have a good link to the info?
> >
> > Mike Hebel
> >
> > -----Original Message-----
> > From: rescue-admin at sunhelp.org [mailto:rescue-admin at sunhelp.org]On
> > Behalf Of Mike Nicewonger
> > Sent: Wednesday, October 11, 2000 2:31 PM
> > To: rescue at sunhelp.org
> > Subject: Re: [SunRescue] Weitek PowerUp Question
> >
> >
> > I myself would leave the chip in the 2. More room, better cooling, no
> chance
> > of damaging the chip.
> >
> > Now what I plan to do with my spare PowerUp is put it into an RDI
> Britelite
> > IPX I have. Now that will be neat.
> >
> > Mike N
> > ----- Original Message -----
> > From: "Kurt Mosiejczuk" <kurt at csh.rit.edu>
> > To: <rescue at sunhelp.org>
> > Sent: Wednesday, October 11, 2000 1:22 PM
> > Subject: Re: [SunRescue] Weitek PowerUp Question
> >
> >
> > > On Wed, 11 Oct 2000, Al Potter wrote:
> > >
> > > > Leave it in the 2 and transplant the other components into it.
> > > >
> > > > The 2 will be marginally faster than an IPX (more hardware contexts)
> and
> > has
> > > > the space for a 2d internal drive.
> > > >
> > > >
> > > > AL
> > >
> > > But the IPX is so much cuter than the 2 =)
> > >
> > > I suppose I could move all the stuff over, I have other 2s that I
> > > figured I'd put the chip in, while my other 2s are all good, I
> > > suspect this one without a power supply has been out of service for
> > > some time and I'd bet it's NVRAM is dead too.  At that point, pulling
> > > the Weitek seems easier than moving power supply, ram ,drives, NVRAM,
> etc.
> > >
> > > --Kurt
> > >
> > > _______________________________________________
> > > Rescue maillist  -  Rescue at sunhelp.org
> > > http://www.sunhelp.org/mailman/listinfo/rescue
> > >
> >
> > _______________________________________________
> > Rescue maillist  -  Rescue at sunhelp.org
> > http://www.sunhelp.org/mailman/listinfo/rescue
> >
> > _______________________________________________
> > Rescue maillist  -  Rescue at sunhelp.org
> > http://www.sunhelp.org/mailman/listinfo/rescue
> >
> 
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
> 






More information about the rescue mailing list