[SunRescue] drive troubles

[Gregory Leblanc]

> -----Original Message-----
> From: Paul Theodoropoulos [mailto:paul at anastrophe.com]
> Sent: Thursday, June 29, 2000 11:21 PM
> To: rescue at sunhelp.org
> Subject: Re: [SunRescue] drive troubles
> 
> I'm not certain, but I believe you *don't* want the 'start on 
> command enable' to be jumpered. That particular one means that you 
> don't want the drive to spin up unless the controller sends a 
> 'start' command.

>From the manual that Toshiba tech support sent me:
"START ON COMMAND ENABLE (J1-PINS 3 & 4) - PRESENT WHEN SHIPPED
When removed, the spindle motor will start only on receipt of the Start Unit
command."

Anyway, I've tried it with that both shorted and not, and the bloody drive
still won't spin up under normal circumstances, only when the test jumper is
enabled.  Is there a way to get the SS2 PROM to explicitly send the Start
Unit SCSI Command?  Thanks,
	Grego