[SunRescue] SS1000

[Mike Nicewonger]

oops see fixes below

--Mike N
-----Original Message-----
From: Mike Nicewonger <twmaster at earthlink.net>
To: rescue at sunhelp.org <rescue at sunhelp.org>
Date: Saturday, February 19, 2000 9:15 PM
Subject: Re: [SunRescue] SS1000


>The CPU goes in slot "A" which is closest to the XD bus. Unit will work
with
>one CPU.
>
>The RAM goes in in this order:
>
>XD Bus
>
>bank    3    3
>bank    2    2
>bank    1    1
>bank    0    0
>bank    3    3
>bank    2    2
>bank    1    1
>bank    0    0

>S-Bus slots.
>
>Put the RAM in bank 0 first, must install 4 pieces at a time.
>
>Cheers,
>
>Mike N
>
>
>--Mike N
>-----Original Message-----
>From: Michael Thompson <m_thompson at ids.net>
>To: rescue at sunhelp.org <rescue at sunhelp.org>
>Date: Saturday, February 19, 2000 8:54 PM
>Subject: [SunRescue] SS1000
>
>
>>I am trying to get a SS1000 running. I have a single 501-2247 board
without
>>CPUs or RAM. My FSM doesn't have the SS1000 in it.
>>
>>I just got 8 8MB SIMMs (501-1817) for it. I can borrow one or two SM51
CPUs
>>from my SS10.
>>
>>Will this run with a single CPU?
>>If I install a single CPU which position does it go in?
>>
>>Which sockets do the SIMMs go in?
>>
>>TIA
>>Michael Thompson
>>m_thompson at ids.net
>>
>>_______________________________________________
>>Rescue maillist  -  Rescue at sunhelp.org
>>http://www.sunhelp.org/mailman/listinfo/rescue
>>
>
>
>_______________________________________________
>Rescue maillist  -  Rescue at sunhelp.org
>http://www.sunhelp.org/mailman/listinfo/rescue
>