[SunRescue] Q: Regarding Sun Educator promo Ultra 5 system
Cyrus M. Reed
reedc at cc.wwu.edu
Wed Apr 19 19:27:56 CDT 2000
Even worse, try finding Buffered EDO ECC DRAM DIMMS, that's the *only*
thing my Dual PPro board (Intel PR440FX) will take. I love the system
(built in 10/100 networking, Adaptec 7880 UW SCSI, I'd call it a
workstation if I didn't know it would be insulting to the real thing), but
RAM is a killer for it. It wasn't so bad a while back when I got the RAM
for it when memory in general was dirt cheap (though this stuff was still
about 50% higher); but now its gone up to about $250/128M when you can
find it at all. I think all the PPro boards required Buffered ECC EDO RAM
if I recall (that is I don't think I've seen any that didn't).
-Cyrus
On Wed, 19 Apr 2000, Gregory Leblanc wrote:
> > -----Original Message-----
> > From: James Lockwood [mailto:james at foonly.com]
> > Sent: Wednesday, April 19, 2000 3:26 PM
> > To: rescue at sunhelp.org
> > Subject: Re: [SunRescue] Q: Regarding Sun Educator promo
> > Ultra 5 system
> >
> >
> > On Wed, 19 Apr 2000 nick at ns.snowman.net wrote:
> >
> > > The u5 (to the best of my knowledge) uses a thing called
> > EDO Dimms. EDO
> > > dimms are evil. The only reason they were ever created is
> > sdram failed to
> > > add something on the order of 2 pins so interleaving could
> > be done. This
> > > means that while sdram is faster 1 on 1, when you boost it
> > up to 1 on 5
> > > (interleaved 5 times) or 1 on 10 (interleaved 10 times)
> > sdram looses.
> >
> > EDO DRAM predates SDRAM. EDO was used to cut down on CAS
> > latch time from
>
> On a side topic, Intel LX based P-II motherboards often used EDO DRAM DIMMS.
> Real pain in the neck to find, costs much more and is a bunch slower than
> SDRAM.
>
> > FPM. SDRAM eliminates that latching interval per address
> > (just bang on
> > RAS to get more bytes out), making it ideal for cache line refilling.
> >
> > You can certainly interleave SDRAM if you like. Most PC motherboard
> > vendors seem to follow the school of thought of "cut costs no matter
> > what", and are therefore unlikely to handle it correctly.
>
> So, uhm, why are these machines using EDO ram? Wouldn't SDRAM be a better,
> faster, cheaper choice?
> Greg
> _______________________________________________
> Rescue maillist - Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>
More information about the rescue
mailing list