[SunRescue] Help IDing a CPU module

[Mike Nicewonger]

how much RAM you want for them?

Mike N
----- Original Message -----
From: Bill Bradford <mrbill at mrbill.net>
To: <rescue at sunhelp.org>
Sent: Friday, April 07, 2000 7:38 PM
Subject: Re: [SunRescue] Help IDing a CPU module


> On Fri, Apr 07, 2000 at 04:30:03PM -0700, James Lockwood wrote:
> > If you hold the CPU module so that the heatsinks are facing you and the
> > mbus connector is at the top, at the bottom left corner there should be
a
> > small square oscillator.  SM41's will have 40.3MHz clocks, preproduction
> > SM45's will have 45MHz, and SM51's will have 50MHz.
> > -James
>
> 50mhz.  SM51s!
>
> Anybody wanna swap me some 4mb 30pin parity SIMMs for a pair of SM51s?
> I've got a pair of 4/6x0MP motherboards here (both with two SM100s each)
> that are in need of RAM.. I've got a 4/630 and a 4/670 chassis for them
> to go in, just need RAM...
>
> Bill
>
> --
> +--------------------+-------------------+
> |   Bill Bradford    |   Austin, Texas   |
> +--------------------+-------------------+
> | mrbill at sunhelp.org | mrbill at mrbill.net |
> +--------------------+-------------------+
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>