[SunRescue] Sparcstation4 aui ethernet connector.

[Creasey, Jon]

What does the plumb parameter do.

-----Original Message-----
From: Jeff Stuesse [mailto:jds at enterpriseconsulting.com]
Sent: 19 July 1999 16:44
To: rescue at ohno.mrbill.net
Subject: Re: [SunRescue] Sparcstation4 aui ethernet connector.


coming late to this thread,,,, but:
you will need to : ifconfig le0 plumb
Jeff

David Cantrell wrote:

> > Iv'e wiggled the cables well.  If i do an ifconfig -a should it show the
> > interface even if it's not configured  as all it shows at the moment is
> > lo0.
>
> I take it that the transceiver _is_ connected to your hub?
> Have you tried a different transceiver?
>
> --
> David - http://www.ThePentagon.com/NukeEmUp
>
> Strong in the force to be, words in weird order use you must.
>
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue



--
================================================================
Jeffrey D. Stuesse - Senior Systems Engineer
Enterprise Systems Consulting, Inc.
mailto:jds at enterpriseconsulting.com
UNIX *is* user friendly (it just chooses friends selectively)
================================================================



_______________________________________________
Rescue maillist  -  Rescue at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/rescue