[SunRescue] Sunos 3.5 on OLDEN sun3toyz

[Tom Schmidt]

When connecting the newer SCSI drives to the 3/60, I don't think I
needed
the bridge controllers (MD/MT).  I believe these were only needed to
convert
the SCSI signals to control the ESDI drives like the 1558.  You will
still
need the MT bridge controller for your tape drive.  So just daisy chain
the SCSI disk onto the SCSI bus, and have the tape drive at the end of
the
chain with a terminator.

Since your disk is already formatted and partitioned, you should be able
to just use steps 1 and 2, and then skip to step 15 in my procedure I
sent
yesterday, which will take you directly to installing the mini-UNIX on
the
swap partition.

Tom
-- 
_____      ___    Tom L. Schmidt, Manager, Component Characterization
  |  |    /   \   Micron Technology, Inc.
  |  |    \___    8000 S. Federal Way  P.O. Box 6  Mail Stop 376
  |  |        \   Boise, Idaho USA  83707-0006
  |  |____\___/   mailto:tschmidt at micron.com
                  http://netnow.micron.net/~tschmidt/