[geeks] MVME/VME boards?

[Cory Smelosky]

Removed the module.  No change.

COnsole port just acts like it's loopback...

On Sun, Oct 23, 2016, at 15:32, Plamen Mihaylov wrote:
> MVME197LE has at least 32mb onboard memory, so you can safely make the
> test
> without the expansion board.
> 
> On Sun, Oct 23, 2016 at 9:54 PM, Cory Smelosky <b4 at gewt.net> wrote:
> 
> > RAM module.
> >
> > Sent from my iPhone
> >
> > > On Oct 23, 2016, at 10:06, Plamen Mihaylov <plamenspam at afterpeople.com>
> > wrote:
> > >
> > > Oh sorry, i made a typo. The right sequence is to hold reset and abort
> > for
> > > 5 seconds, then release reset and holding abort for another 5 seconds,
> > then
> > > release abort switch.
> > > What is the other board? MVM712 with P2 adapter or MVME297 ram module ?
> > >
> > >> On Sun, Oct 23, 2016 at 7:31 PM, Cory Smelosky <b4 at gewt.net> wrote:
> > >>
> > >> On Sun, 23 Oct 2016, Plamen Mihaylov wrote:
> > >>
> > >> Also if the flash memory doesn't has the debugger firmware, you have to
> > >>> boot from bootbug(eprom).
> > >>> Press abort and reset front buttons for 5 seconds, then release reset
> > and
> > >>> hold the reset for another 5 seconds.
> > >>>
> > >>>
> > >> Release reset and then press it again?
> > >>
> > >>
> > >> --
> > >> Cory Smelosky
> > >> http://gewt.net Personal stuff
> > >> http://gimme-sympathy.org Projects
> > >> _______________________________________________
> > >> GEEKS:  http://www.sunhelp.org/mailman/listinfo/geeks
> > > _______________________________________________
> > > GEEKS:  http://www.sunhelp.org/mailman/listinfo/geeks
> > _______________________________________________
> > GEEKS:  http://www.sunhelp.org/mailman/listinfo/geeks
> _______________________________________________
> GEEKS:  http://www.sunhelp.org/mailman/listinfo/geeks


-- 
  Cory Smelosky
  b4 at gewt.net