[geeks] Looking for small AT power supply

[Lionel Peterson]

I've got an actual AT PS now, it works fine, but I'd like a smaller option. (I
kept the power switch attached to the PS)

One person suggested the ATX -> AT jumper cable and I thought about coupling
that with a PicoITX plug-in adapter, running the server off a wall-wart...
That looks like a $35-40 solution, not crazy, but a bit high for now.

I suspect I'll keep my current setup (it cost me nothing) and probably get an
ATX -> AT adapter cable to keep on-hand 'just in case'...

Lionel

> On May 28, 2014, at 12:54 PM, Bill Bradford <mrbill at mrbill.net> wrote:
>
>> On Wed, May 28, 2014 at 12:30:05PM -0400, Lionel Peterson wrote:
>> I've dug out my Apple Replica 1 that I built over 8 years ago, and after
>> tossing through a few old Pentium boxes in the basement I found a working
AT
>> power supply and established the system works fine.
>
> I ran mine off an ATX power supply with an ATX-to-AT adapter, and the
> right jumper wire between certain pins so it would power up.
>
> Bill
>
> --
> Bill Bradford
> Houston, Texas USA
> _______________________________________________
> GEEKS:  http://www.sunhelp.org/mailman/listinfo/geeks