[geeks] APC UPS question

[Bryan Fullerton]

On 10/20/05, Michael Kaegler <Michael.Kaegler at marist.edu> wrote:
> Battery Charge LED blink means "can't sustain current load for more
> than x minutes" where X is, by default, 2.
> Sounds like the UPS is dead...if it were the battery, the replace
> batt light should be lit.

And if the battery is dead and the UPS is working properly it should
be BEEEPING constantly and driving you completely nuts until you turn
it off just to shut it up. :)

Bryan