[geeks] What am I missing?

[David Selders]

On Sun, Apr 25, 2004 at 04:36:21AM -0400, Jeff Cole wrote:
> Maybe I'm just overly tired, but, I am unable to get one of two
> interfaces on my Ultra2 to respond to network traffic.
> 
> Here's the setup:
> 
> ifconfig -a4
> lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
>         inet 127.0.0.1 netmask ff000000
> 
> hme1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
>         inet 192.168.0.201 netmask ffffff00 broadcast 192.168.0.255
>         ether 8:0:20:8d:19:6f
> 
> hme0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
> 	inet 192.168.0.200 netmask ffffff00 broadcast 192.168.0.255
>  	ether 8:0:20:8d:19:6f
> 

Well your two hme interfaces are sharing one ethernet address, you could
change the ethernet address using ifconfig.  I have had this problem in
the past.  I also notice that hme0 is not 'UP' so you might need to
ifconfig hme0 up on that guy.  Good luck!

-- 
David