[geeks] What's your computing present (equipment inventory)

[William Staniewicz]

Presently, I have the following in my small apartment in
Amsterdam, NL:

Micron Millennia Mme, 166mhz Pentium MMx, 32mb RAM, 3.2 gig HDD,
	17" Micron monitor, FreeBSD/Plan 9-Inferno/Win95.

Apollo DN3010 (picked up yesterday) I haven't looked inside but these
	are the specs: CPU: 68020, 12 MHz; FPU: 68881; MMU: 68851;
	Bus: AT-bus; SAU: SAU8; Display: Mono, 4 or 8 plane 1024x800,
	mono 1280x124; HDD: ESDI up to 380M; Memory: 4 slots,
	up to 2M in each slot; Network: ATR (single or dual slot)
	or 3C505 Ethernet or IBM TokenRing 802.5

Apollo monitor: 19" standard resolution color 1024x800.
Apollo keyboards: (2)
Logitech mouse: (2)
Calcomp 2200 model 22180-02 digitizer pad

Hoping to have soon:

Apollo DN10000 (looked at yesterday, trying to figure out where to put
	it, how to move it, etc). These are the spec's though:

CPU: Up to 4 PRISM 18.18 MHz RISC CPUs FPU: BIT (Bipolar Integrated
Technologies) MMU: Toshiba (CMOS) Bus: X-bus, VME-bus, AT-bus SAU:
SAU10 Display: 8-plane AT-bus 1024x800, 40-plane X-Bus DVS 1280x1024
(single slot) or 80-plane X-Bus DVS 1280x1024 (dual slot) HDD: Up to 4
VME controllers, up to 2 ESDI drives (up to 1.5G per drive) on each
controller, but only space for 4 internal drives.  Also possible SCSI
drives on WD7000-ASC at SR10.4 Memory: Up to 3 memory boards, up to 4
modules on each board, modules up to 64M each Network: VME Ethernet,
VME Apollo Token Ring, AT IBM Token Ring Other: 80286 on ETH802.3_VME
and 68020, 12 MHz on X-bus Utility board

I may be picking up 7 DN3500's and 2 monitors but not sure of how to
get them from the UK to here inexpensively and where to put them.  My
back, shoulders are still sore from yesterdays move.

		-Bill