=head1 NAME

mrtg-unix-guide - The MRTG 2.17.2 Linux/Unix Installation Guide

=head1 DESCRIPTION

MRTG comes to you in Source Code. This means that you have to compile
parts of it before you can use it on a Unix machine. These instructions
help you to do so.

=head1 PREPARATION

In order to compile and use mrtg you need a C compiler and a copy of perl
installed on your machine. In most cases this will already be available.
In case it is not, here are some starting points. Below I'll give you
a detailed run through the whole compilation process.

=over

=item GCC

The GNU C compiler comes preinstalled on most of the free Unicies out
there.  For commercial derivatives you may have to download and compile
it first. If you have no compiler at all there is a chicken and egg
problem, but there are also precompiled versions of gcc available for
most operating systems.

 http://gcc.gnu.org/

=item Perl

Large parts of the MRTG system are written in the Perl scripting language.
Make sure there is a recent copy of perl on your machine (try perl -v). At
least version 5.005 is required for mrtg to work well. If you use SNMPV3 and
other new features you should use at least 5.8.

You can get the latest perl from

 http://www.perl.com/

=back

MRTG generates traffic graphs in the PNG format. To be able to do this it
needs several 3rd party libraries. When compiling these libraries I urge you
to make sure you compile them as B<static> libraries. There is just much
less trouble ahead if you are doing it like this. See the Instructions in
the next section for inspiration. Note that many free unices have all
the required libraries already in place so there is no need to install
another copy. To check it is best to skip all the library instructions below
and go straight into the mrtg compile.

If the first attempt fails and you do not get a working version of mrtg,
try compiling new copies of all libraries as explained below. Do this
B<BEFORE> you send email to me about problems compiling mrtg.

=over

=item gd

This is a basic graph drawing library created by Thomas Boutell.
Note that all releases after Version 1.3 only create
PNG images. This is because a) Thomas got into trouble because the GIF
format which it used to produce uses a compression technology patented
by Unisys. b) PNG is more efficient and patent free. MRTG can work
with old and new version of the GD library. You can get a recent copy
of GD from:

 http://www.boutell.com/gd/

=item libpng

Is required by gd in order to produce PNG graphics files. Get it from:

 http://www.libpng.org/pub/png/libpng.html

=item zlib

Is needed by libpng to compress the graphics files you create.
Get a copy from

 http://www.gzip.org/zlib

=back

And last but not least you also need mrtg itself. In case you have not
yet downloaded it, you can find a copy on my website:

 http://oss.oetiker.ch/mrtg/pub

=head1 LIBRARY COMPILATION

In this section I will give you step by step instructions on how to compile
the various libraries required for the compilation of mrtg. Note that these
libraries may already be installed if you have a I<*BSD> or I<Linux> system
so you can skip recompiling them. The B<wget> program used below is a
simple web downloader. You can also enter the address into your B<netscape>
if you don't have B<wget> available.

First let's create a directory for the compilation. Note that this may
already exist on your system. No problem, just use it.

 mkdir -p /usr/local/src
 cd /usr/local/src

If you do not have zlib installed:

 wget http://www.zlib.net/zlib-1.2.3.tar.gz
 gunzip -c zlib-*.tar.gz | tar xf -
 rm zlib-*.tar.gz
 mv zlib-* zlib
 cd zlib
 ./configure
 make
 cd ..

If you don't have libpng installed

 wget ftp://ftp.simplesystems.org/pub/libpng/png/src/libpng-1.2.40.tar.gz
 gunzip -c libpng-1.2.34.tar.gz | tar xf -
 mv libpng-* libpng
 cd libpng
 env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR 
 make
 rm *.so.* *.so
 cd ..

And now you can compile gd

For versions up to 1.8.4, try:

 wget http://www.boutell.com/gd/http/gd-1.8.4.tar.gz
 gunzip -c gd-*.tar.gz |tar xf -
 rm gd-*.tar.gz
 mv gd-* gd
 cd gd

The \ characters at the end of the following lines mean that all the
following material should actually be written on a single line.
 
 perl -i~ -p -e s/gd_jpeg.o//g Makefile            
 make INCLUDEDIRS="-I. -I../zlib -I../libpng" \
      LIBDIRS="-L../zlib -L. -L../libpng" \
      LIBS="-lgd -lpng -lz -lm" \
      CFLAGS="-O -DHAVE_LIBPNG"
 cd ..

For versions starting around 2.0.11, try:

 wget http://www.boutell.com/gd/http/gd-2.0.33.tar.gz
 gunzip -c gd-2.0.33.tar.gz |tar xf -
 mv gd-2.0.33 gd
 cd gd
 env CPPFLAGS="-I../zlib -I../libpng" LDFLAGS="-L../zlib -L../libpng" \
     ./configure --disable-shared --without-freetype --without-jpeg
 make
 cp .libs/* .

=head1 MRTG COMPILATION

Ok, now everything is ready for the mrtg compilation.

 cd /usr/local/src
 gunzip -c mrtg-2.17.2.tar.gz | tar xvf -
 cd mrtg-2.17.2

If all the libraries have been preinstalled on your system you can
configure mrtg by doing a simple:

 ./configure --prefix=/usr/local/mrtg-2

Otherwise you may have to give some hints on where to find the
various libraries required to compile mrtg:

 ./configure --prefix=/usr/local/mrtg-2       \
             --with-gd=/usr/local/src/gd      \
             --with-z=/usr/local/src/zlib     \
             --with-png=/usr/local/src/libpng

If you have RRDtool available you might want to tell mrtg about it
so that you can opt to use rrdtool with mrtg. Check L<mrtg-rrd>.

Configure will make sure your environment is fit for building mrtg.
If it finds a problem, it will tell you so and it will also tell
you what to do about it. If everything is OK, you will end up with
a custom Makefile for your system. Now type:

 make

This builds the rateup binary and edits all the perl pathnames in
the scripts. You can now install mrtg by typing

 make install   (requires gnu install)

All the software required by MRTG is now installed under
the F</usr/local/mrtg-2> subdirectory.

You can now safely delete the libraries we compiled above. Then
again, you might want to keep them around so that you have them
available when compiling the next version of mrtg.

=head1 CONFIGURATION

The next step is to configure mrtg for monitoring a network
device.  This is done by creating an F<mrtg.cfg> file which defines
what you want to monitor. Luckily, you don't have to dive straight in
and start writing your own configuration file all by
yourself. Together with mrtg you also got a copy of B<cfgmaker>. This
is a script you can point at a router of your choice; it will
create a mrtg configuration file for you. You can find the script in
the F<bin> subdirectory.

 cfgmaker --global 'WorkDir: /home/httpd/mrtg'  \
          --global 'Options[_]: bits,growright' \
          --output /home/mrtg/cfg/mrtg.cfg    \
           community@router.abc.xyz

This example above will create an mrtg config file in
F</home/mrtg/cfg> assuming this is a directory visible on your
webserver. You can read all about cfgmaker in L<cfgmaker>. One area you might
want to look at is the possibility of using B<--ifref=ip> to prevent
interface renumbering troubles from catching you.

If you want to start rolling your own mrtg configuration files, make sure
you read L<mrtg-reference> to learn all about the possible configuration options.

=head1 RUNNING MRTG

Once you have created a configuration file, try the following:

 /usr/local/mrtg-2/bin/mrtg /home/mrtg/cfg/mrtg.cfg

This will query your router and also create your first mrtg trafic
graphs and webpages. When you run mrtg for the first time there will
be a lot of complaints about missing log files. Don't worry, this is
normal for the first 2 times you start mrtg. If it keeps complaining
after this time you might want to look into the problem.

Starting mrtg by hand is not ideal in the long run. So when you are
satisfied with the results you can automate the process of running mrtg in
regular intervals (this means every 5 minutes by default).

You can either add mrtg to your crontab with a line like this:

 0,5,10,15,20,25,30,35,40,45,50,55 * * * * \
       <mrtg-bin>/mrtg <path to mrtg-cfg>/mrtg.cfg \
                --logging /var/log/mrtg.log

or if you live in Linux Land the line may look like this if you are
using C<crontab -e>

 */5 * * * *  <mrtg-bin>/mrtg <path to mrtg-cfg>/mrtg.cfg \
                       --logging /var/log/mrtg.log

or like this if you use F</etc/crontab>

 */5 * * * *  mrtg-user  <mrtg-bin>/mrtg <path to mrtg-cfg>/mrtg.cfg \
                                 --logging /var/log/mrtg.log                  

You can also run mrtg as a daemon process by adding the line

 RunAsDaemon: Yes

to your mrtg configuration file and then creating a startup script in
your system startup sequence. Unfortunately, adding startup scripts
differs widely amongst different unix systems. The modern ones normally
have a directory called F</etc/init.d> or F</etc/rc.d/init.d> where you
put scripts which starts the process you want to run when the system
boots. Further you must create a symbolic link in F</etc/rc3.d> or
F</etc/rc.d/rc?.d> called F<S65mrtg> (this is just a sample name
... it is just important that it starts with S followed by a two digit
number). If you are not sure about this, make sure you consult the
documentation of your system to make sure you get this right.

A B<minimal> script to put into F<init.d> might look like this:

 #! /bin/sh
 cd /usr/local/mrtg-2.17.2/bin && ./mrtg --user=mrtg-user \
       /home/httpd/mrtg/mrtg.cfg  --logging /var/log/mrtg.log                  


Note that this will only work with B<RunAsDaemon: Yes> in your
mrtg.cfg file.

=head1 AUTHOR

Tobias Oetiker E<lt>tobi@oetiker.chE<gt>

