snmpa_conf(3)

NAME
snmpa_conf - Utility functions for handling the agent config files.

DESCRIPTION

The module snmpa_conf contains various utility functions to used for manipulating (write/append/read) the config files of the SNMP agent.

EXPORTS

agent_entry(Tag, Val) -> agent_entry()

    Types
        Tag = intAgentIpAddress | intAgentUDPPort | intAgentMaxPacketSize | snmpEngineMaxMessageSize | snmpEngineID
        Val = term()
        agent_entry() = term()

    Create an entry for the agent config file, agent.conf .

    The type of Val depends on the value of Tag , see Agent Information for more info.

write_agent_config(Dir, Conf) -> ok
write_agent_config(Dir, Hdr, Conf) -> ok

    Types
        Dir = string()
        Hdr = string()
        Conf = [agent_entry()]

    Write the agent config to the agent config file.

    Dir is the path to the directory where to store the config file.

    Hdr is an optional file header (note that this text is written to the file as is).

    See Agent Information for more info.

append_agent_config(Dir, Conf) -> ok

    Types
        Dir = string()
        Conf = [agent_entry()]

    Append the config to the current agent config file.

    Dir is the path to the directory where to store the config file.

    See Agent Information for more info.

read_agent_config(Dir) -> Conf

    Types
        Dir = string()
        Conf = [agent_entry()]

    Read the current agent config file.

    Dir is the path to the directory where to store the config file.

    See Agent Information for more info.

standard_entry(Tag, Val) -> standard_entry()

    Types
        Tag = sysDescr | sysObjectID | sysContact | sysName | sysLocation | sysServices | snmpEnableAuthenTraps
        Val = term()
        standard_entry() = term()

    Create an entry for the agent standard config file, standard.conf .

    The type of Val depends on the value of Tag , see System Information for more info.

write_standard_config(Dir, Conf) -> ok
write_standard_config(Dir, Hdr, Conf) -> ok

    Types
        Dir = string()
        Hdr = string()
        Conf = [standard_entry()]

    Write the agent standard config to the agent standard config file.

    Dir is the path to the directory where to store the config file.

    Hdr is an optional file header (note that this text is written to the file as is).

    See System Information for more info.

append_standard_config(Dir, Conf) -> ok

    Types
        Dir = string()
        Conf = [standard_entry()]

    Append the standard config to the current agent standard config file.

    Dir is the path to the directory where to store the config file.

    See System Information for more info.

read_standard_config(Dir) -> Conf

    Types
        Dir = string()
        Conf = [standard_entry()]

    Read the current agent standard config file.

    Dir is the path to the directory where to store the config file.

    See System Information for more info.

context_entry(Context) -> context_entry()

    Types
        Context = string()
        context_entry() = term()

    Create an entry for the agent context config file, context.conf .

    See Contexts for more info.

write_context_config(Dir, Conf) -> ok
write_context_config(Dir, Hdr, Conf) -> ok

    Types
        Dir = string()
        Hdr = string()
        Conf = [context_entry()]

    Write the agent context config to the agent context config file.

    Dir is the path to the directory where to store the config file.

    Hdr is an optional file header (note that this text is written to the file as is).

    See Contexts for more info.

append_context_config(Dir, Conf) -> ok

    Types
        Dir = string()
        Conf = [context_entry()]

    Append the context config to the current agent context config file.

    Dir is the path to the directory where to store the config file.

    See Contexts for more info.

read_context_config(Dir) -> Conf

    Types
        Dir = string()
        Conf = [context_entry()]

    Read the current agent context config file.

    Dir is the path to the directory where to store the config file.

    See Contexts for more info.

community_entry(CommunityIndex) -> community_entry()
community_entry(CommunityIndex, CommunityName, SecName, ContextName, TransportTag) -> community_entry()

    Types
        CommunityIndex = string()
        CommunityName = string()
        SecName = string()
        CtxName = string()
        TransportTag = string()
        community_entry() = term()

    Create an entry for the agent community config file, community.conf .

    CommunityIndex must be a non-empty string.

    community_entry("public") translates to the following call: community_entry(CommunityIndex, CommunityIndex, "initial", "", "") .

    community_entry("all-rights") translates to the following call: community_entry(CommunityIndex, CommunityIndex, CommunityIndex, "", "") .

    See Community for more info.

write_community_config(Dir, Conf) -> ok
write_community_config(Dir, Hdr, Conf) -> ok

    Types
        Dir = string()
        Hdr = string()
        Conf = [community_entry()]

    Write the agent community config to the agent community config file.

    Dir is the path to the directory where to store the config file.

    Hdr is an optional file header (note that this text is written to the file as is).

    See Community for more info.

append_community_config(Dir, Conf) -> ok

    Types
        Dir = string()
        Conf = [community_entry()]

    Append the community config to the current agent community config file.

    Dir is the path to the directory where to store the config file.

    See Community for more info.

read_community_config(Dir) -> Conf

    Types
        Dir = string()
        Conf = [community_entry()]

    Read the current agent community config file.

    Dir is the path to the directory where to store the config file.

    See Communities for more info.

target_addr_entry(Name, Ip, TagList, ParamsName, EngineId) -> target_addr_entry()
target_addr_entry(Name, Ip, TagList, ParamsName, EngineId, TMask) -> target_addr_entry()
target_addr_entry(Name, Ip, Udp, TagList, ParamsName, EngineId, TMask, MaxMessageSize) -> target_addr_entry()
target_addr_entry(Name, Ip, Udp, Timeout, RetryCount, TagList, ParamsName, EngineId, TMask, MaxMessageSize) -> target_addr_entry()

    Types
        Name = string()
        Ip = string()
        Udp = integer()
        Timeout = integer()
        RetryCount = integer()
        TagList = string()
        ParamsName = string()
        EngineId = string()
        TMask = string()
        MaxMessageSize = integer()
        target_addr_entry() = term()

    Create an entry for the agent target_addr config file, target_addr.conf .

    Name must be a non-empty string.

    target_addr_entry/5 translates to the following call: target_addr_entry(Name, Ip, TagList, ParamsName, EngineId) .

    target_addr_entry/6 translates to the following call: target_addr_entry(Name, Ip, 162, TagList, ParamsName, EngineId, TMask, 2048) .

    target_addr_entry/8 translates to the following call: target_addr_entry(Name, Ip, Udp, 1500, 3, TagList, ParamsName, EngineId, TMask, MaxMessageSize) .

    See Target Address Definitions for more info.

write_target_addr_config(Dir, Conf) -> ok
write_target_addr_config(Dir, Hdr, Conf) -> ok

    Types
        Dir = string()
        Hdr = string()
        Conf = [target_addr_entry()]

    Write the agent target_addr config to the agent target_addr config file.

    Dir is the path to the directory where to store the config file.

    Hdr is an optional file header (note that this text is written to the file as is).

    See Target Address Definitions for more info.

append_target_addr_config(Dir, Conf) -> ok

    Types
        Dir = string()
        Conf = [target_addr_entry()]

    Append the target_addr config to the current agent target_addr config file.

    Dir is the path to the directory where to store the config file.

    See Target Address Definitions for more info.

read_target_addr_config(Dir) -> Conf

    Types
        Dir = string()
        Conf = [target_addr_entry()]

    Read the current agent target_addr config file.

    Dir is the path to the directory where to store the config file.

    See Target Address Definitions for more info.

target_params_entry(Name, Vsn) -> target_params_entry()
target_params_entry(Name, Vsn, SecName, SecLevel) -> target_params_entry()
target_params_entry(Name, MPModel, SecModel, SecName, SecLevel) -> target_params_entry()

    Types
        Name = string()
        Vsn = v1 | v2 | v3
        MPModel = v1 | v2c | v3
        SecModel = v1 | v2c | usm
        SecName = string()
        SecLevel = noAuthNoPriv | authNoPriv | authPriv
        target_params_entry() = term()

    Create an entry for the agent target_params config file, target_params.conf .

    Name must be a non-empty string.

    Vsn translates into MPModel and SecModel as follows:

    \011 Vsn = v1 => MPModel = v1, SecModel = v1 \011 Vsn = v2 => MPModel = v2c, SecModel = v2c \011 Vsn = v3 => MPModel = v3, SecModel = usm

    target_params_entry/2 translates to the following call: target_params_entry(Name, Vsn, "initial", noAuthNoPriv) .

    target_params_entry/4 translates to the following call: target_params_entry(Name, MPModel, SecModel, SecName, SecLevel) where MPModel and SecModel is mapped from Vsn , see above.

    See Target Parameters Definitions for more info.

write_target_params_config(Dir, Conf) -> ok
write_target_params_config(Dir, Hdr, Conf) -> ok

    Types
        Dir = string()
        Hdr = string()
        Conf = [target_params_entry()]

    Write the agent target_params config to the agent target_params config file.

    Dir is the path to the directory where to store the config file.

    Hdr is an optional file header (note that this text is written to the file as is).

    See Target Parameters Definitions for more info.

append_target_params_config(Dir, Conf) -> ok

    Types
        Dir = string()
        Conf = [target_params_entry()]

    Append the target_params config to the current agent target_params config file.

    Dir is the path to the directory where to store the config file.

    See Target Parameters Definitions for more info.

read_target_params_config(Dir) -> Conf

    Types
        Dir = string()
        Conf = [target_params_entry()]

    Read the current agent target_params config file.

    Dir is the path to the directory where to store the config file.

    See Target Parameters Definitions for more info.

vacm_s2g_entry(SecModel, SecName, GroupName) -> vacm_s2g_entry()
vacm_acc_entry(GroupName, Prefix, SecModel, SecLevel, Match, ReadView, WriteView, NotifyView) -> vacm_acc_entry()
vacm_vtf_entry(ViewIndex, ViewSubtree) -> vacm_vtf_entry()
vacm_vtf_entry(ViewIndex, ViewSubtree, ViewStatus, ViewMask) -> vacm_vtf_entry()

    Types
        SecModel = v1 | v2c | usm
        SecName = string()
        GroupName = string()
        Prefix = string()
        SecLevel = noAuthNoPriv | authNoPriv | authPriv
        Match = prefix | exact
        ReadView = string()
        WriteView = string()
        NotifyView = string()
        ViewIndex = integer()
        ViewSubtree = [integer()]
        ViewStatus = included | excluded
        ViewMask = null | [zero_or_one()]
        zero_or_one() = 0 | 1
        vacm_s2g_entry() = term()
        vacm_acc_entry() = term()
        vacm_vtf_entry() = term()

    Create an entry for the agent vacm config file, vacm.conf .

    vacm_vtf_entry/2 translates to the following call: vacm_vtf_entry(ViewIndex, ViewSubtree, included, null) .

    See MIB Views for VACM for more info.

write_vacm_config(Dir, Conf) -> ok
write_vacm_config(Dir, Hdr, Conf) -> ok

    Types
        Dir = string()
        Hdr = string()
        Conf = [vacm_entry()]
        vacm_entry() = vacm_sg2_entry() | vacm_acc_entry() | vacm_vtf_entry()

    Write the agent vacm config to the agent vacm config file.

    Dir is the path to the directory where to store the config file.

    Hdr is an optional file header (note that this text is written to the file as is).

    See MIB Views for VACM for more info.

append_vacm_config(Dir, Conf) -> ok

    Types
        Dir = string()
        Conf = [vacm_entry()]

    Append the vacm config to the current agent vacm config file.

    Dir is the path to the directory where to store the config file.

    See MIB Views for VACM for more info.

read_vacm_config(Dir) -> Conf

    Types
        Dir = string()
        Conf = [vacm_entry()]

    Read the current agent vacm config file.

    Dir is the path to the directory where to store the config file.

    See MIB Views for VACM for more info.

usm_entry(EngineId) -> usm_entry()
usm_entry(EngineID, UserName, SecName, Clone, AuthP, AuthKeyC, OwnAuthKeyC, PrivP, PrivKeyC, OwnPrivKeyC, Public, AuthKey, PrivKey) -> usm_entry()

    Types
        EngineId = string()
        UserName = string()
        SecName = string()
        Clone = zeroDotZero | [integer()]
        AuthP = usmNoAuthProtocol | usmHMACMD5AuthProtocol, | usmHMACSHAAuthProtocol
        AuthKeyC = string()
        OwnAuthKeyC = string()
        PrivP = usmNoPrivProtocol | usmDESPrivProtocol | usmAesCfb128Protocol
        PrivKeyC = string()
        OwnPrivKeyC = string()
        Public = string()
        AuthKey = [integer()]
        PrivKey = [integer()]
        usm_entry() = term()

    Create an entry for the agent vacm config file, vacm.conf .

    usm_entry/1 translates to the following call: usm_entry("initial", "initial", zeroDotZero, usmNoAuthProtocol, "", "", usmNoPrivProtocol, "", "", "", "", "") .

    See Security data for USM for more info.

write_usm_config(Dir, Conf) -> ok
write_usm_config(Dir, Hdr, Conf) -> ok

    Types
        Dir = string()
        Hdr = string()
        Conf = [usm_entry()]

    Write the agent usm config to the agent usm config file.

    Dir is the path to the directory where to store the config file.

    Hdr is an optional file header (note that this text is written to the file as is).

    See Security data for USM for more info.

append_usm_config(Dir, Conf) -> ok

    Types
        Dir = string()
        Conf = [usm_entry()]

    Append the usm config to the current agent vacm config file.

    Dir is the path to the directory where to store the config file.

    See Security data for USM for more info.

read_usm_config(Dir) -> Conf

    Types
        Dir = string()
        Conf = [usm_entry()]

    Read the current agent usm config file.

    Dir is the path to the directory where to store the config file.

    See Security data for USM for more info.

notify_entry(Name, Tag, Type) -> notify_entry()

    Types
        Name = string()
        Tag = string()
        Type = trap | inform
        community_entry() = term()

    Create an entry for the agent notify config file, notify.conf .

    Name must be a non-empty string.

    See Notify Definitions for more info.

write_notify_config(Dir, Conf) -> ok
write_notify_config(Dir, Hdr, Conf) -> ok

    Types
        Dir = string()
        Hdr = string()
        Conf = [notify_entry()]

    Write the agent notify config to the agent notify config file.

    Dir is the path to the directory where to store the config file.

    Hdr is an optional file header (note that this text is written to the file as is).

    See Notify Definitions for more info.

append_notify_config(Dir, Conf) -> ok

    Types
        Dir = string()
        Conf = [notify_entry()]

    Append the notify config to the current agent notify config file.

    Dir is the path to the directory where to store the config file.

    See Notify Definitions for more info.

read_notify_config(Dir) -> Conf

    Types
        Dir = string()
        Conf = [community_entry()]

    Read the current agent notify config file.

    Dir is the path to the directory where to store the config file.

    See Notify Definitions for more info.