rlwrap(1)

NAME
rlwrap - readline wrapper

SYNOPSIS
rlwrap [rlwrap-options] command ...

DESCRIPTION
rlwrap runs the specified command, intercepting user input in order to provide readline's line editing, persistent history and completion.

rlwrap tries to be completely transparent - you (or your shell) shouldn't notice any difference between command and rlwrap command - except the added readline functionality, of course. This should even hold true when you are re-directing, piping and sending signals from and to command, or when command manipulates its terminal settings.

There are many options to add (programmable) completion, handle multi-line input, colour and re-write prompts. If you don't need them (and you probably don't), you can skip the rest of this manpage.

OPTIONS

Always remain in "readline mode", regardless of command's terminal settings.
    Use this option if you want to use rlwrap with commands that already use readline. NB: With this option, rlwrap will echo (and save) passwords, unless you give command's password prompt as an argument.

    On a linux machine you can use the -N (--no-children) option to prevent the wrapping of pagers and editors called from command; this should make them much more usable

    Many commands that need --always-readline may also need -t dumb to prevent terminal control sequences from confusing rlwrap (although this will annoy the above-mentioned pagers and editors)

Prompts that use colour will confuse rlwrap, especially at the end of
    long input lines. This option will make rlwrap better behaved in such cases. If the prompt contains anything fancier than ANSI colour codes, this option may actually make things worse.

Consider the specified characters word-breaking (whitespace is
    always word-breaking). This determines what is considered a "word", both when completing and when building a completion word list from files specified by -f options following (not preceding!) it. Default list (){}[],+-=&^%$#@"";|\ Unless -c is specified, / and . (period) are included in the default list.

Complete filenames (filename completion is always case-sensitive, even with the
    -i option)

Use command_name instead of command to determine the names of
    history and completion files, and to initialise readline (as specified in ~/.inputrc). A numeric argument N > 0 means: use the Nth argument counting backwards from the end of the argument list

How agressively to weed out duplicate entries from the input history.
    If n = 0, all inputs are kept in the history list, if n = 1 (this is the default) consecutive duplicates are dropped from the list, while n = 2 will make rlwrap drop all previous occurrences of the current input from the list.

Split file into words and add them to the completion word list. This
    option can be given more than once, and adds to the default completion list in $RLWRAP_HOME or /opt/share/rlwrap/completions.

Forget (i.e. drop from history list) all input lines that match
    the POSIX 1003.2 regular expression regexp. The match is always case-insensitive. regexp may be an ordinary string. For more about regular expressions, see regex (7)

Print a short help message.

Read command history  from file (and write it back there if
    --histsize >= 0)

Ignore case when completing (filename completion remains case-sensitive). This option has to come before any -f options.

Send a TERM signal to command when an INT is received (e.g. when you
    press CTRL-C).

When in readline mode, append command's output (including echo'ed user input) to
    file (creating file when it doesn't exist).

Don't print warnings.

(linux only) Don't rlwrap command's children: whenever rlwrap notices that
    command is waiting for one of its children, it switches to direct mode, handing down all keypresses immediately. With this option commands that need --always-readline can call editors and pagers and still be usable.

Enable multi-line input using a "newline substitute" character
    sequence (" \ ", [space-backslash-space] by default). Newline substitutes are translated to newlines before sending the input to command. With this option, you can call an external editor $RLWRAP_EDITOR on the (expanded) current input with the rlwrap_call_editor key (CTRL-^ by default)

Send an EOF to command after accepting the first line of input

Only ever "cook" prompts that match regexp

Use one of the colour names black, red, green, yellow, blue, cyan, purple (=magenta) or white, or an ANSI-conformant <colour_spec> to colour any prompt displayed by
    command. An uppercase colour name (Yellow or YELLOW ) gives a bold prompt. Prompts that already contain (colour) escape sequences or one of the readline "ignore markers" (ASCII 0x01 and 0x02) are not coloured. This option implies --ansi-colour-aware. <colour spec> has the form <attr>;<fg>[;<bg>] Example: -p'1;31' will give a bold red prompt on the current background (this is the default when no argument is given). Google for 'ANSI color' to learn more about colour codes.

Start rlwrap with  text in its edit buffer (this will automatically
    set the --always-readline option).

Assume that the given characters act as quotes, e.g. when matching
    parentheses. Take care to escape the list properly for your shell (example: -q "\"'", which happens to be the default, or -q "\"" which will be better for Lisp users)

Put all words seen on in- and output on the completion list.

Make rlwrap nicer than command (cf nice (1)). This may prevent rlwrap from
    interrupting command to display a prompt when command is still "thinking" about what to output next.

Limit the history list to N entries, truncating the history file
    (default: 300). A negative size -N means the same as N, but treats the history file as read-only.

Substitute the specified prompt for  command's own prompt. Mainly useful when  command doesn't have a prompt.

Set command's TERM to <name>. Programs that confuse rlwrap with fancy screen control codes can sometimes be tamed by specifying -t dumb

Print rlwrap version.

In order to determine if  commands last output is a prompt, rlwrap waits timeout millisecs after receiving it.
    Only when no more output has arrived, it is cooked (coloured, filtered and/or replaced by a substitute prompt) and displayed as a prompt. Before this the prompt is displayed "uncooked". Most users won't notice, but heavy cookers can prepend the timeout with a minus sign, making rlwrap hold back the prompt until it has been cooked ("patient mode"). This will prevent flashing of the prompt, but it will also interfere with long output lines and make switches from direct to readline mode less reliable. Default timeout: 40 ms

Use a filter to change rlwrap's behaviour. A filter can be used to keep certain input out of the history,
    to change the prompt, to implement simple macros or programmable completion.. rlwrap comes with a special perl module (cf. RlwrapFilter(3pm)) for easy filter writing. A number of example filters are installed in the directory /opt/share/rlwrap/filters. "rlwrap -z <filter>" displays information about a filter, "rlwrap -z listing" lists all currently installed filters. If <filter> needs arguments, you should quote the whole filter command line:

        rlwrap -z 'filter args' command

    If this command line contains shell metacharacters, rlwrap passes it to the system shell for parsing.

EXAMPLES

Run nc (netcat) with command-line editing and history
    rlwrap nc

Wrap smbclient (which uses readline itself), keep passwords out of the history and don't wrap commands launched from smbclient (like more)
    rlwrap -aPassword: -N smbclient //PEANUT/C

Wrap gauche (a Scheme interpreter) with a bold blue prompt, enable mult-line editing and don't consider single quotes as quotes (so that the parentheses in (print 'q) match)
    rlwrap -pBlue -m -q'"' gosh

Get a list of all currently installed filters
    rlwrap -z listing

Get help for the filter pipeto
    rlwrap -z pipeto

Wrap sqlite3, use the pipeto filter to be able to pipe the output of SQL commands through grep and/or less, complete (case-insensitively) on the SQL keywords in 'sql_words'
    rlwrap -a -z pipeto -i -f sql_words sqlite3 contacts.db

In a shell script, use rlwrap in 'one-shot' mode as a replacement for read
    order=`rlwrap -S 'Your pizza? '-H past_orders -P Margherita -o cat`

DIRECT MODE AND READLINE MODE
Most simple console commands put your terminal either in "cooked" or in "raw" mode. In cooked mode the terminal will wait until you press the ENTER key before handing the entire line to the program, in raw mode every key you press is handed down immediately. In cooked mode you generally can use the backspace key, but not the arrow keys, to edit your input. Most simple console commands use cooked mode whenever they want whole input lines, and raw mode when they want single keypresses. More sophisticated commands tend to use raw mode all the time; they may sometimes be rlwrappable with the -a (and -N) options.

When you rlwrap command, rlwrap will run it a in a separate session, with its own "pseudo-terminal" (pty), and monitor this pty to see whether the pty is in raw mode or in cooked mode. In the first case, rlwrap will copy all input and output directly between command and your terminal ("direct mode"). In the second case, rlwrap will use readline to edit your input ("readline mode"), and monitor commands output - every last line that doesn't end with a newline is a potential prompt. How it handles such a candidate prompt depends on its being in "patient" or "impatient" mode:

PATIENT AND IMPATIENT MODE
If command writes a lot of output, it tends to be written (and read) in "chunks". Not all chunks will end with a newline, and we need to distinguish their last lines from real prompts, especially if we want to re-write ("cook") prompts. rlwrap solves this (almost) by waiting a little, to see if there is more to come. "A little" is 40 msec by default, but this can be changed with the -w option. Normally rlwrap writes the suspected prompt as soon as it is received, replacing it with a "cooked" version afer the wait time. This is called "impatient" mode. If you don't like the flashing effect (which will only occur when you "cook" the prompt heavily) you can put rlwrap in "patient mode" by specifying a negative value with -w (e.g. -w -40). Rlwrap will then hold back the prompt and only print if after cooking.

COOKING PROMPTS
If and when rlwrap decides that it has a prompt, it will perform a number of actions on it, depending on the given options: filtering (-z), substituting (-S) and colouring (-p), in this order. The resulting "cooked" prompt is then printed (after erasing the "raw" prompt, if necessary)

SPECIAL KEYS

Control + O
    Accept the current line, but don't put it in the history list. This action has a readline command name rlwrap-accept-line-and-forget

Control + ^
    Use an external editor to edit the current input (this will only work if the -m option is set). This action has a readline command name rlwrap-call-editor

These special keys were chosen because are not currently bound to any readline action. If you don't like them, (or your window manager swallows them) they can be re-bound more sensibly by including lines like the following in your ~/.inputrc:

   "\M-\C-m": rlwrap-accept-line-and-forget # ESC-ENTER
   "\C-xe":   rlwrap-call-editor            # CTRL-x e

cf. the readline(3) manpage for more about re-binding keys

ENVIRONMENT

RLWRAP_HOME:
    directory in which the history and completion files are kept.

RLWRAP_EDITOR (or else EDITOR, or else VISUAL):
    editor to use for multi-line input. Example:

    export RLWRAP_EDITOR="microemacs-l%L:%C"
    export RLWRAP_EDITOR="vi +%L"

The last example is the default; %L and %C are replaced by line and column numbers corresponding to the cursor position in rlwraps edit buffer

RLWRAP_FILTERDIR:
    Any executable along your PATH can in theory be used as a filter, but because filters have to follow a rather outlandish protocol (cf. RlwrapFilter (3)) it is a good idea to keep them separate. This is why rlwrap adds a special filter directory to $PATH just before launching a filter. By default, this is /opt/share/rlwrap/filters, but $RLWRAP_FILTERDIR is used if set.

SIGNALS

A number of signals are forwarded to command: HUP INT QUIT USR1 USR2 TERM and (by way of resizing commands terminal) WINCH. Some care is taken to handle TSTP (usually a result of a CTRL-Z from the terminal) sensibly - for example, after suspending rlwrap in the middle of a line edit, continuing (by typing 'fg') will land you at the exact spot where you suspended it.

Filters that take more than 1 second to respond can be interrupted by a CTRL-C from the terminal (although rlwrap will not survive this)

If command changes the keystrokes that send a particular signal from the keyboard (like emacs, which uses CTRL-G instead of CTRL-C) rlwrap will do the same.

When command is killed by a signal, rlwrap will clean up, reset its signal handlers an then commit suicide by sending the same signal to itself. This means that your shell sees the same exit status as it would have seen without rlwrap.

REDIRECTION
When the standard input is not a terminal, editing input doesn't make sense, so rlwrap will ignore all options and simply execute command. When stdout (or stderr) is not a terminal, rlwrap will re-open it to /dev/tty (the users terminal) after it has started command, so that commands output is redirected as expected, but keyboard input and rlwrap error messages are still visible.

The upshot of this is that rlwrap command behaves more or less like command when redirecting.

EXIT STATUS
non-zero after a rlwrap error, or else command's exit status. rlwrap will always leave the terminal in a tidy state, even after a crash.

FILES
rlwrap expects its history and completion files in $RLWRAP_HOME, but uses .dotfiles in the user's home directory if this variable is not set. This will quickly become messy if you use rlwrap a lot.

$RLWRAP_HOME/command_history, ~/.command_history
    History for command

$RLWRAP_HOME/command_completions, ~/.command_completions
    Per-user completion word list for command. rlwrap never writes into this list, but one can combine -l and -f options to to simulate the effect of a -r option that works across invocations.

/opt/share/rlwrap/completions/command
    System-wide completion word list for command. This file is only consulted if the per-user completion word list is not found.

$INPUTRC, ~/.inputrc
    Individual readline initialisation file (See readline (3) for its format). rlwrap sets its application name to command (unless you use the -C option), enabling different behaviours for different commands. One could e.g. put the following lines in ~/.inputrc:

       $if coqtop
           set show-all-if-ambiguous On
       $endif

    making rlwrap show all completions whenever it runs coqtop

BUGS and LIMITATIONS
Though it is flexible, delivers the goods (readline functionality), and adheres to the Unix "many small tools" paradigm, rlwrap is a kludge. It cannot know anything about command's internal state, which makes context-sensitive completion impossible. Using the readline library from within command is still the best option.

Also, because "it takes two to tango" there is no way for rlwrap to synchronise its internal state with command, resulting in a number of subtle race conditions, where e.g. command may have changed the state of its terminal before rlwrap has read command output that was written before the state change. You will notice these races especially on a busy machine and with heavy "cooking" and filtering, when suddenly (and unpredictably) promtps or command output are garbled or incorrectly coloured.

Filtering is a very recent addition, and should be considered alpha quality.

rlwrap can try, but often fails to, handle prompts that contain control characters. A flter may be used to clean up the prompt.

VERSION
This manpage documents rlwrap version 0.35

AUTHORS
The readline library (written by Chet Ramey) does all the hard work behind the scenes, the pty-handling code has been taken practically unchanged from rxvt-2.7.10 (currently maintained by Geoff C. Wing), and completion word lists are managed by Damian Ivereigh's libredblack library. The few remaining lines of code were written by Hans Lub (hanslub42@gmail.com).

SEE ALSO

readline(3), RlwrapFilter(3pm)