# leave at least one comment here to skip the BOM character
# language name
lang => Norsk
# Common
Settings saved => Innstillingene ble lagret
Settings not saved => Innstillingene ble ikke lagret
Save Changes => Lagre endringer
Apply Changes => Aktiver endringer
Clear Changes => Glem endringer
Review Changes => Se endringer
Host Name => Vertsnavn
Uptime => Oppetid
Load => Systembelastning
Version => Versjon
Categories => Kategorier
Subcategories => Underkategorier
more... => mer...
Add => Legg til
Remove => Fjern
Warning => Advarsel
Password_warning => Det er ikke satt et passord på hverken Webadministrasjon eller SSH.
Vennligst velg eller tast inn ditt passord (Brukernavn er 'root' med små bokstaver).

# Categories
Info => Info
About => Om OpenWrt
Router Info => Routerinformasjon

Status => Status
Connections => Nettverksforbindelser
DHCP => DHCP
Wireless => Trådløs

System => System
Password => Passord
Settings => Innstillinger
Installed Software => Installerte programmer
Firmware Upgrade => Firmwareoppgradering

Network => Nettverk
LAN => Lokalnett
WAN => Internett
Wireless => Trådløs
Advanced Wireless => Avansert trådløs
Hosts => Vertsnavn

# 'About' page
Copyright => Opphavsrett

GPL_Text => Dette programmet er fri programvare.  Du må bruke, endre og videredistribuere det under betingelsene i "GNU General Public License",
 som offentliggjort av "Free Software Foundation" (Den frie programbevegelse), enten i versjon 2 av lisensen eller (etter ditt valg), en hvilkensomhelst senere versjon.

Contributions by => Bidrag fra
Layout based on => Layout er basert på
by => av

No config change. => Ingen konfigurasjonsendring foretatt
Config discarded. => Konfigurasjonsendringerne ble forkastet
Config changes: => Foreløpige endringer
Updating config... => Oppdaterer konfigurasjonen

# 'Router Info' page
Firmware Version => Firmwareversjon
Kernel Version => Kjerneversjon
Current Date/Time => Nåværende tid/dato
MAC Address => MAC adresse

# 'Connections' page
Connection Status => Forbindelsesstatus
Physical Connections => Fysiske forbindelser
Router Connections => Routerens forbindelser

# 'DHCP' page
status_leases_dhcp_leases => DHCP leasinger
status_leases_IP => IP adresse
status_leases_MAC => MAC adresse
status_leases_Name => Navn
status_leases_Expires => Utløpstid

# 'Wireless Status' page
Wireless Status => Trådløs status

# 'Password' page
Password Change => Endre passord
New Password => Nytt passord
Confirm Password => Nytt passord igjen

# 'System Settings' page
System Settings => Systeminnstillinger
Host Name => Vertsnavn
Language => Språk

# 'Installed Software' page
Installed Packages => Installerte pakker
Update package lists => Oppdater pakkelisten
Uninstall => Avinstaller
Install => Installer
Available packages => Tilgjengelige pakker

# 'Firmware Upgrade' page
Firmware format => Firmwareformat
Error => Feil
done => ferdig
Invalid_format => Ugyldig_format
Erase_JFFS2 => Slett_JFFS2_partisjonen
Options => Alternativer
Firmware_image => Firmwarefil
Upgrade => Oppgrader
Upgrading... => Oppgraderer...

# 'LAN Settings' page
LAN Settings => Lokale nettinnstillinger
LAN Configuration => Lokal nettverkskonfigurasjon
Netmask => Undernettmaske
Default Gateway => Standard gateway
DNS Servers => DNS-tjenere
DNS Address => DNS-tjeneradresse

Note => Merk

# 'WAN Settings' page
WAN Settings => WAN-innstillinger
WAN Configuration => WAN-konfigurasjon
PPTP Server IP => PPTP-tjeneradresse
Connection Type => Forbindelsestype
No WAN => Ingen WAN
DHCP => DHCP
Static IP => Statisk IP
IP Settings => IP-innstillinger
PPP Settings => PPP-innstillinger
Redial Policy => Gjenoppringingspolise
Connect on Demand => Ring opp når behovet er der
Keep Alive => Hold forbindelsen i live (keep alive)
Maximum Idle Time => Maksimal tid i tomgang (max idle)
Redial Timeout => Gjenoppringningsavbrekkstid
MTU => MTU
Username => Brukernavn

# 'Wireless Configuration' page
Wireless Configuration => Trådløs konfigurasjon
Wireless Interface => Trådløst nettkort
WEP Key => WEP nøkler
Selected WEP Key => Valgt WEP nøkkel
WPA PSK => WPA nøkler
ESSID => ESSID
Channel => Kanal
RADIUS IP Address => IP adressen på RADIUS server
RADIUS Server Key => Passord til RADIUS server
Enabled => Aktivert
Disabled => Deaktivert
ESSID Broadcast => ESSID-Kringkasting 
Show => Vis
Hide => Skjul
WLAN Mode => Trådløs tilstand
Access Point => Tilgangspunkt
Client => Klient
Bridge => Bro
Ad-Hoc => Ad-Hoc
Encryption Settings => Krypteringsinnstillinger
Encryption Type => Krypteringstype
PSK => PSK-kode
WPA Mode => WPA tilstand
WPA Algorithms => WPA krypteringsalgoritme
WEP Keys => WEP nøkler

# 'Advanced Wireless Configuration' page
Advanced Wireless Configuration => Avansert oppsett av trådløs
WDS Connections => WDS forbindelser (WDS repeater)
MAC Filter List => Filteringsliste (MAC-nummer)
Filter Mode => Filtreringstilstand
Allow => Tillat
Deny => Forby
Set => Sett
Settings => Innstillinger
Automatic WDS => Automatisk WDS-forbindelse

# "Hosts" page

MAC Address => MAC-adresse
Configured Hosts => Vertsnavn
DHCP Static => Statiske IP adresser til DHCP
Host Names => Vertsnavn

Up => Opp
Down => Ned
Edit => Endre
Delete => Slette
Save => Lagre
Cancel => Annuller

Forward => Forward (videresend)
Accept => Accept (tillat)
Drop => Drop (kast)

Firewall => Brannmur
Firewall Rules => Brannmurregler
Firewall Configuration => Brannmurkonfigurasjon

New Rule => Ny regel
Match => Match (sammenlign)
Target => Target (Gå til)
Port => Port

Protocol => Protokoll
Source IP => Avsenders IP
Destination IP => Mottakers IP
Source Ports => Avsenders porter
Destination Ports => Mottakers porter

Forward to => Send videre til
Port => Port

Helptext ESSID => Navn på trådløs nettverk
Helptext DNS save => Lagre endringer på denne siden før du legger til eller fjerner DNS-tjenere (Hvis du ikke vil miste dem.)

Helptext Operation mode => Setter driftstilstanden for den trådløse delen av routeren. 'Klient' og 'Klient (bro)' brukes for å koble 2 trådløse routere. I mange tilfeller er WDS en bedre (men mer avansert) løning. 'Klient' utnytter dog båndbredden best, hvis du kun har en maskin tilkoblet. 
 Innstillingen 'Klient (bro)' endrer ikke direkte ved nettverksinnstillingene. Det er et lite 'hack' som få routeren til å tro at kun en maskin (en MAC-adresse) er tilkoblet. Det er gjort for å overvinne begrensninger i 802.11-protokollen, som forhindrer at man problemfritt (i vanlig 'Klient'-tilstand) kan bruke den trådløse forbindelsen fra flere maskiner samtidig. 
 AP brukes til en standalone router, hvor f.eks bærbare pc'er skal ha tilgang til Internett og/eller lokalt nettverk. 
 Hvis du ikke vet hva 'Ad Hoc'-tilstanden gjø, har du sannsynligvis ikke bruk for den.

Helptext Encryption Type => 'WPA (RADIUS)' er kun støttet i AP (Tilgangspunkt)-tilstand. 
 'WPA (PSK)' fungerer ikke i 'Ad-Hoc' tilstand.

Helptext IP Settings => IP-innstillinger er frivillig for DHCP og PPTP. Nå de er satt, blir de brukt som standardverdier hvis en DHCP-tjener ikke er tilgjengelig.

Helptext Idle Time => Ventetid med inaktivitet før routeren kobler ned forbindelesen.

Helptext Redial Timeout => Ventetid før routeren forsøker å ringe opp igjen.

## new format
## you are free to translate the part between "new format comments"
## replace any text after "=" and ">" with your translation

## network hosts
network_hosts_host_IP_invalid => Host's IP Address
network_hosts_Host_Name => Vertsnavn
network_hosts_MAC => MAC adresse
network_hosts_static_IP_invalid => Static IP Address
network_hosts_Configured_Hosts => Vertsnavn
network_hosts_Host_Names => Vertsnavn
network_hosts_IP => IP adresse
network_hosts_Remove => Fjern
network_hosts_Add => Legg til
network_hosts_Host_Names_helptext => The file /etc/hosts is used to look up the IP address of a device connected to a computer network. The hosts file describes a many-to-one mapping of device names to IP addresses. When accessing a device by name, the networking system attempts to locate the name within the hosts file before accessing the Internet domain name system.
network_hosts_DHCP_Static_IPs => Static IP addresses (for DHCP)
network_hosts_Static_IPs => Static IP addresses
network_hosts_Static_IPs_helptext => The file /etc/ethers contains database information regarding known 48-bit ethernet addresses of hosts on an Internetwork. The DHCP server uses the matching IP address instead of allocating a new one from the pool for any MAC address listed in this file.
network_hosts_Active_Leases => Active DHCP Leases
network_hosts_Name => Navn
network_hosts_Expires => Utløpstid
network_hosts_h => h
network_hosts_min => min
network_hosts_sec => sec
network_hosts_No_leases => There are no known DHCP leases.
Network => Nettverk
Hosts => Vertsnavn

## status-leases.sh
Status => Status
DHCP Clients => DHCP Clients
status_leases_dhcp_leases => DHCP leasinger
status_leases_MAC => MAC adresse
status_leases_IP => IP adresse
status_leases_Name => Navn
status_leases_Expires => Utløpstid
status_leases_h => h
status_leases_min => min
status_leases_sec => sec
status_leases_no_leases => There are no known DHCP leases.
status_leases_dhcp_leases => DHCP Leases
status_leases_dhcp_leases_helptext => DHCP leases are assigned to network clients that request an IP address from the DHCP server of the router. Clients that requested their IP lease before this router was last rebooted may not be listed until they request a renewal of their lease.
status_leases_additional => Additional information
status_leases_arp_title => Address Resolution Protocol Cache (ARP)
status_leases_HW => HW Type
status_leases_Flags => Flags
status_leases_Mask => Mask
status_leases_completed => completed
status_leases_permanent => permanent
status_leases_published => published
status_leases_no_arp_record => ARP Cache does not contain any correspondent record.
status_leases_ethers_title => Ethernet Address to IP Number Database (/etc/ethers)
status_leases_ethers_empty => File /etc/ethers does not contain any Ethernet address/IP address pair.
status_leases_no_ethers => File /etc/ethers does not exist.

## status-usb.sh
status_usb_umount_error_in => Error in
Status => Status
USB => USB
status_usb_USB_Devices => USB Devices
status_usb_All_connected_devices => All connected devices (excluding system hubs)
status_usb_Bus => Bus
status_usb_Device => Device
status_usb_Product => Product
status_usb_Manufacturer => Manufacturer
status_usb_VPIDs => VendorID:ProdID
status_usb_USB_version => USB version
status_usb_Mounted_USB_SCSI => Mounted USB / SCSI devices
status_usb_filesystems => File systems
status_usb_Device_Path => Device Path
status_usb_Mount_Point => Mount Point
status_usb_File_System => File System
status_usb_Read_Write => Read/Write
status_usb_Action => Action
status_usb_ro => Read only
status_usb_rw => Read/Write
status_usb_umount => umount
status_usb_swaps => Swaps
status_usb_swap_PartitionFilename => Partition/Filename
status_usb_swap_Type => Type
status_usb_swap_Size => Size
status_usb_swap_Used => Used
status_usb_swap_Priority => Priority
status_usb_swap_partition => partition
status_usb_swap_file => file
status_usb_Loaded_USB_drivers => Loaded USB drivers

## status-wwaninfo.sh
Status => Status
UMTS => UMTS
status_wwaninfo_UG_Status => UMTS/GPRS Status
status_wwaninfo_no_UG_device => UMTS / GPRS device not found.
status_wwaninfo_device_info => Device Information
status_wwaninfo_dev_th_Information => Information
status_wwaninfo_dev_th_Value => Value
status_wwaninfo_no_UG_device_info => No device information reported.
status_wwaninfo_Signal_Quality => Signal Quality
status_wwaninfo_quality_unknown => Signal quality is invalid/unknown
status_wwaninfo_Power_Ratio => Power Ratio (dBm)
status_wwaninfo_Legend => Legend
status_wwaninfo_quality_Unreliable => Unreliable
status_wwaninfo_quality_Workable => Workable
status_wwaninfo_quality_Good => Good
status_wwaninfo_quality_Excellent => Excellent
status_wwaninfo_wrong_value => Wrong signal quality value

## new format

 Show raw statistics  =>
802.11b =>
802.11b + 802.11g =>
802.11g (afterburner) =>
802.11g (performance) =>
802.11g (range - LRS) =>
802.11g with 802.11b deferred =>
Action =>
Active DHCP Leases =>
Add New NVRAM Setting =>
Add Repository =>
APN Name =>
APN Settings =>
Application Protocol =>
Auth Servers =>
Authentication =>
Authentication Method =>
Backup and Restore =>
Board =>
Board Type =>
Bulk =>
Bulk IP Address =>
Bulk TCP Port =>
Bulk TCP Ports =>
Bulk UDP Port =>
Bulk UDP Ports =>
Bytes =>
Cache Size =>
Certificate (PKCS12) =>
Certificate Status =>
Change NVRAM Setting =>
Check_Upgrade =>
Circular =>
Classify As =>
Config Name =>
Connection Settings =>
Conntrack Settings =>
Conntrack Table =>
Cron =>
Cron Jobs =>
Cron Tables =>
Current Repositories =>
Dangerous Settings =>
Data Rate Down =>
Data Rate Up =>
Delete NVRAM Setting =>
Device =>
Device Status =>
DHCP Bail =>
DHCP Configuration =>
DHCP Interfaces =>
DHCP Lease Minutes =>
DHCP Num =>
DHCP Server For =>
DHCP Service =>
DHCP Start =>
Distance =>
Diversity =>
Domain =>
Download =>
Download Configuration =>
Download Speed =>
DynDNS Settings =>
edit =>
edit_qos_cfg =>
Enable/Disable Unbridged Wireless =>
Encryption Key =>
Everything =>
Express =>
Express IP Address =>
Express TCP Port =>
Express TCP Ports =>
Express UDP Port =>
Express UDP Ports =>
EZ-IP-Update Messages =>
File =>
File Editor =>
Forwarding a port =>
Found Installed Certificate. =>
Found Installed Keyfile =>
Frameburst =>
Frequency =>
General System Settings =>
Generated =>
Generic Timeout =>
G-mode Protection =>
GPRS only =>
Group =>
Hostname =>
ICMP Timeout =>
Incoming Traffic =>
Install Package From URL =>
Interfaces Status =>
Isolate WLAN clients =>
kilobits =>
LAN Bridge WDS Connections =>
LAN DNS Servers =>
LAN IP Address =>
Layer 7 Filtering =>
Layer 7 Protocols =>
Layer7 =>
Lazy WDS On/Off =>
Lease Max =>
Left =>
Local Log =>
Log Debug Output =>
Log File =>
Log Queries =>
Long =>
Maximum Connections =>
Maximum Number Of Connections =>
Mesh Configuration =>
Meshing =>
Modify =>
Monowall_Credit =>
Name this configuration =>
NAS Package =>
Netfilter Log =>
Netstat =>
Networking Tweaks =>
new rule =>
No Certificate uploaded yet! =>
No Hosts =>
No Keyfile uploaded yet! =>
No Reg Cache =>
No Resolv =>
No WAN Proto =>
Noise Level =>
no_qos =>
No_Target_IP_Port =>
NTP Server =>
NVRAM settings to set (by prefix; be careful!) =>
OpenVPN =>
OpenVPN Status =>
Options For =>
or a close derivative =>
Outgoing Traffic =>
Packages Available =>
Parameters =>
Passphrase =>
Peer-2-Peer =>
Peername =>
PIN Code =>
Port range =>
Port Range =>
PPPoE Status =>
PPTP Client =>
PPTP Client Connection =>
PPTP Client Connections =>
PPTP Status =>
PPTP VPN Users =>
PPTPD Server =>
Preamble (Default: Long) =>
Preferred Connection Type =>
Prefix =>
Preshared Key =>
Preshared Key Status =>
Priority =>
Priority IP Address =>
Priority $n $d Ceiling =>
Priority $n $d Filter Sequence =>
Priority $n $d Quantum =>
Priority $n $d Rate =>
Priority TCP Port =>
Priority TCP Ports =>
Priority UDP Port =>
Priority UDP Ports =>
QOS Bulk IP Addresses =>
QOS Configuration =>
QOS Express IP Addresses =>
QOS Internet Speed Configuration =>
QOS Layer  Protocol Filtering =>
QoS Options =>
QoS Packages =>
QoS Packets  =>
QOS Priority Configuration =>
QOS Priority IP Addresses =>
QoS Rule Edit =>
QoS Service =>
QoS Traffic Classification Rules =>
Quality of Service Statistics =>
Radus =>
Raw Information =>
Read Ethers =>
Receive Antenna Diversity =>
Received =>
Remote host =>
remove =>
Repo. Name =>
Repo. URL =>
Repository URL =>
Reset to Defaults =>
Right =>
Router Listening Ports =>
Routing Table =>
Rx Invalid Encryption =>
Rx Invalid nwid =>
Saved config.tgz file: =>
Select Network =>
Server Address =>
Server Port (default: 1194) =>
Services Configuration =>
Shaping Status =>
Short =>
SIM Configuration =>
sorted_by_name =>
Split WLAN From Switch Bridge =>
Start VPN Connection =>
Startup =>
Strict Order =>
Submit =>
Survey Results =>
Syslog Messages =>
syslog Settings =>
Syslog View =>
TCP Established Timeout =>
TCP Timeout (in seconds) =>
Theme =>
Time Settings =>
Timezone =>
Traffic Shaping =>
Traffic Shaping Settings =>
Translator_Credit =>
Transmit Antenna Diversity =>
Transmit Power =>
Transmit Power (in mw) =>
Transmitted =>
Tx Invalid =>
Tx Missed Beacon =>
Tx Retries in Excess =>
UDP Stream Timeout =>
UDP Timeout =>
UDP Timeout (in seconds) =>
UMTS first =>
UMTS only =>
UMTS/GPRS Status =>
Upgrade_Webif =>
Upload Configuration =>
Upload PKCS12 Certificate =>
Upload Preshared Key =>
Upload Speed =>
Upload Successful =>
UPNP =>
UPNP Daemon =>
URL of Package =>
Value =>
Virtual LANs =>
VLAN Configuration =>
Wake-On-LAN =>
WAN DNS Address =>
WAN DNS Servers =>
WAN Down Data Rate =>
WAN Download (bits/sec) =>
WAN Download Speed =>
WAN IP Address =>
WAN Netmask =>
WAN Up Data Rate =>
WAN Upload (bits/sec) =>
WAN Upload Speed =>
WAN-LAN Configuration =>
WDS Configuration =>
WDS Options =>
WDS SSID =>
WDS watchdog timeout =>
Webif² Settings =>
Webif² Upgrade =>
WEP Key 1 =>
WEP Key 2 =>
WEP Key 3 =>
WEP Key 4 =>
Wireless Bridge Configuration =>
Wireless LAN Configuration =>
Wireless Mode =>
Wireless survey =>
wol_help =>
Committing =>
config file =>
conntrack settings =>
Critical Error =>
Done =>
firewall settings =>
hotspot settings =>
networking settings =>
PPTP settings =>
Processing =>
QOS settings =>
Reloading Cron =>
Reloading syslogd ... =>
Restarting =>
system settings =>
theme settings =>
traffic shaping settings =>
UPNPd =>
wireless settings =>
Directory =>
Filesystem Browser =>
Parent Directory =>
Root =>
Short help =>
Invalid value =>
maximum =>
Administrative Console =>
making_usable =>
qos_enabled => Aktivert
qos_adv_enabled => Aktivert
qos_disabled => Deaktivert
qos_adv_disabled => Deaktivert
