Go to the first, previous, next, last section, table of contents.

M680x0 Options

These are the `-m' options defined for the 68000 series. The default values for these options depends on which style of 68000 was selected when the compiler was configured; the defaults for the most common choices are given below.

-m68000
-mc68000
Generate output for a 68000. This is the default when the compiler is configured for 68000-based systems.
-m68020
-mc68020
Generate output for a 68020. This is the default when the compiler is configured for 68020-based systems.
-m68881
Generate output containing 68881 instructions for floating point. This is the default for most 68020 systems unless `-nfp' was specified when the compiler was configured.
-m68030
Generate output for a 68030. This is the default when the compiler is configured for 68030-based systems.
-m68040
Generate output for a 68040. This is the default when the compiler is configured for 68040-based systems. This option inhibits the use of 68881/68882 instructions that have to be emulated by software on the 68040. If your 68040 does not have code to emulate those instructions, use `-m68040'.
-m68020-40
Generate output for a 68040, without using any of the new instructions. This results in code which can run relatively efficiently on either a 68020/68881 or a 68030 or a 68040. The generated code does use the 68881 instructions that are emulated on the 68040.
-mfpa
Generate output containing Sun FPA instructions for floating point.
-msoft-float
Generate output containing library calls for floating point. Warning: the requisite libraries are not available for all m68k targets. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. The embedded targets `m68k-*-aout' and `m68k-*-coff' do provide software floating point support.
-mshort
Consider type int to be 16 bits wide, like short int.
-mnobitfield
Do not use the bit-field instructions. The `-m68000' option implies `-mnobitfield'.
-mbitfield
Do use the bit-field instructions. The `-m68020' option implies `-mbitfield'. This is the default if you use a configuration designed for a 68020.
-mrtd
Use a different function-calling convention, in which functions that take a fixed number of arguments return with the rtd instruction, which pops their arguments while returning. This saves one instruction in the caller since there is no need to pop the arguments there. This calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries compiled with the Unix compiler. Also, you must provide function prototypes for all functions that take variable numbers of arguments (including printf); otherwise incorrect code will be generated for calls to those functions. In addition, seriously incorrect code will result if you call a function with too many arguments. (Normally, extra arguments are harmlessly ignored.) The rtd instruction is supported by the 68010 and 68020 processors, but not by the 68000.


Go to the first, previous, next, last section, table of contents.